Power Supply Unit UPS MIDI Compact I 200-600Watt

Power Supply Systems / DC-UPS (PDF, 0.4 MB)

-Battery charging control
-Optimum adaptation of charge current due to battery temperature measurement (max. permissible constant current for minimum battery charging time).
-Separation of the battery from the load circuit before reaching battery deep discharge state.
-Float charge on reaching the voltage at the beginning of gassing (with constant voltage).
-Power supply module monitoring (PSU)
-Battery capacity test
-Registration and linking of connected monitoring sensor systems
-Transmission of analysis and alarm data via binary interfaces
-Display of operating and alarm states via LEDs.
-Auxiliary supply for sensory systems.
-Programming of sensor evaluations.

Dimension
-Width 19"
-Height 6 U
-Depth 285 mm

Standards
-EN 55022B
-EN 61000-3-2
-EN 61000-4 part 2 - 5
-EN 50081 - 1
-EN 50082 - 2
-EN 60950
-VDE 0160
-Constructed in accordance with UL 1950
-Constructed in accordance with UL 1459

Technical data
-Output power 200 W per PSU module regulated at 115 / 230 V AC ( 230 V AC with convection cooling )
-Regulation Current-regulated (with temperature-regulated adaption )
-Efficiency 85% at full load
-Outout factor ( at full load ) > 0.8 in accordance with EN 61000-3-2
-Ventilation convection
-Derating from Tu 35° C
-Operating temperature range 0° C to + 60° C ( switch-off at > 60° C )
-Storage temperature range - 40° C to + 85° C
-Humidity 30% to 95% ( no condensation moisture )
-Voltage range 100 V AC .... 240 V AC
-Input current limit 5 A
-Output voltage 48 V DC
-Setting range of the output voltage 42 V DC to 58.5 V DC, short circuit-proof
-MTBF > 100,000 hrs in ilne with MIL HDBK 217 F

Supply schedule
1 Modular chassis, 6 U equipped with - 1...3 Power supply module ( PSU ) with output power of 200 W each - Charge controller 9 HP ( without display / RS-232 interface ) - Integrated battery pack 13 Ah - Integrated DC distribution with output fuses

How supplied
-in batches