tecoras® outdoor basis cabinet w-700 -- 700 mm

Highlights
  • Double-wall attachable outdoor enclosure
  • With EMC sealing
  • Natuarally vented double walls
  • Naturally vented roof
  • All bolting and connection elements situated inside
  • Hinged solar protection roof
  • Doorstop changeable
  • Door with lock and release lever for extrusion half-cylinder with saw protection, triple interlocking system
  • Door lock-in, lock-out, with opening angles of 90° and 135°
For the installation of
  • Components in accordance with IEC 297-3 (19") or IEC 917 (metric)
  • Non-standard equipment with max. installation width of 535 mm
Load rating
  • 900 lbs static
Standards
  • Built-in units in accordance with IEC 297-3 (19") and IEC 917 (metric)
  • Earthing in accordance with VDE 0100
  • IP protection in accordance with EN 60529c
Degree of protection
  • IP 55
Tests
  • Environmental test in accordance with IEC 68-2-1, IEC 68-2-2, IEC 68-2-5, IEC 68-2-56
  • Vibration tested in accordance with IEC 68-2-6
  • Earthquakeproof to zone 4 in accordance with Telcordia GR-63-CORE
  • Shielding attenuation in accordance with IEC 61 587-3 at least 25 dB
Material / Finish
  • Basic rack: extruded aluminium AlMgSi0,5
  • Corner piece: die-cast aluminium
  • Internal cover panel: aluminium AlMg 3, 1.5 mm thick, chrome-plated
  • External cover panel: aluminium AlMg 3, 2 mm thick, chrome-plated, powder-coated front quality in accordance with
  • GSB International, coarse textured
  • Plinth frame: zinc passivated sheet steel
  • Plinth cover panel: hot-galvanized (zinc-coated) sheet steel DX 51 D + Z 140, 1.5 mm
Color
  • RAL 7035 light-grey
Supply schedule
  • 1 Body consisting of basic rack, cover, base, rear panel, 2 side panels, 2 corner extrusions
  • 1 Rear cover panel
  • 2 Side cover panel
  • 1 Solar protection roof
  • 1 Front door, opens to the right, closed
  • 1 Plinth frame 210 mm high, with 2 side cover panels, with 1 front and 1 rear removeable panel
  • 1 Earthing set
  • 1 Cable entrance panel, closed
How supplied
  • Assembled
Note
  • Various cabinet combinations can be configured from the same basic modules.
  • Double or triple cabinets are formed from the extension of one or two add-on cabinets to the basic cabinet. The extension is made on the side cover panel.
  • These combinations are also possible with an add-on enclosure mounted on the right or the left.
  • The extension is made on the side cover panel.

Tecoras Basic Cabinet W 700
with closed front door
Double-wall
Order Number
width installation width depth useable depth height installation height h
B [mm] b [mm] T [mm] t [mm] H [mm] [U] [mm]
700 535 405 330 1110 20 895 01.901.003.1
1290 24 1075 01.901.005.1
1510 29 1295 01.901.007.1
1690 33 1475 01.901.009.1
700 535 705 630 1110 20 895 01.901.013.1
1290 24 1075 01.901.015.1
1510 29 1295 01.901.017.1
1690 33 1475 01.901.019.1